Vantron S3016 16-Port + 2-SFP L2 Gigabit Managed Industrial Switch

Vantron S3016 16-Port + 2-SFP L2 Gigabit Managed Industrial Switch features 16 Gigabit copper ports and 2 SFP fiber slots, delivering dependable Layer 2 Ethernet connectivity optimized for industrial networks. It supports VLAN tagging, IGMP snooping, ERPS, QoS, and robust security measures such as ACL and 802.1X authentication to secure network communications.
 
Advanced diagnostics including cable testing and digital monitoring enhance system reliability. Designed for harsh environments, it operates within a wide temperature range and mounts easily on DIN rails for flexible industrial integration.
 
This switch fits industrial IoT, smart grids, transportation, renewable energy, and manufacturing systems, ensuring stable and manageable network performance under demanding conditions.
 
Key features
16 x Gigabit copper port, 2 x Gigabit SFP fiber slot
GUI, CLI, SNMP v1/v2c/v3, RMON, MIB, SSH, Telnet
Port control, port mirroring, flow control
VLAN (802.1Q, 802.1ad)
802.1x authentication, ACL, QoS
Redundant power supply
Alarm relay & factory reset support
Wide temperature range & input voltage
 
Specifications
Memory: 256MB DDR2
Storage: 32MB flash
Gigabit copper port: 16 x RJ45, 10/100/1000M Base-T (X), automatic flow control, full/half duplex mode, MDI/MDI-X
Gigabit fiber port: 1 x SFP, 1G Base-X; 1 x SFP, 1G/2.5G Base-X
Standards: 10Base-T: IEEE 802.3; 100Base-TX: IEEE 802.3u; 1000Base-T: IEEE 802.3ab; 1000Base-X: IEEE 802.3z; Flow control: IEEE 802.3x
Switching capability:>42Gbps
Forwarding mode: Store and forward
Packet buffer: 4Mbit
Packet forwarding rate: 62.49Mpps
MAC address table: 8K
RJ45 console port: 1 x RS232 (115200, 8N1)
Alarm relay: 1 x 2-pin x 7.62mm (Current load: 1A @24VDC)
Button: 1 x Restore button (press for more than 10s to factory reset the device)
LED indicator: ALARM: System fault indicator; RUN: Normal operation indicator; PWR2: Backup power indicator; PWR1: Main power indicator
Dimensions: 165mm x 130mm x 68mm
Installation: DIN rail mounting
Input: 12V~48V DC/16~30V AC (12V/2A DC recommended), 1 x 4-pin x 5.0mm terminal block (Dual redundant power supply, over-current protection, reverse polarity protection)
Consumption: <5.5W (Idle); < 15W (Full load)
Temperature: Operating: -40℃ ~ +75℃; Storage: -40℃ ~ +85℃
Humidity: Operating: 0-90% RH (Non-condensing); Storage: 0-90% RH (Non-condensing)
Certification: CE, FCC, UL
Industry standards: FCC CFR47 Part 15, EN55032/CISPR22, Class A; IEC61000-4-2 (ESD): ±6kV (contact), ±8kV (air); IEC61000-4-3 (RS): 10V/m (80MHz～2GHz); IEC61000-4-4 (EFT): Power port: ±2kV, Data port: ±1kV; IEC61000-4-5 (Surge): Power port: ±1kV/DM, ±2kV/CM, Data port: ±2kV/CM; IEC61000-4-6 (CS): 10V (150kHz～80MHz)
Management access: Web-based GUI: Parameter configuration, multi-user administration, role segregation; Command line interface (CLI): SSH/Telnet remote access & configuration
Protocols & features: SNMP v1/v2c/v3, RMON (1, 2, 3, 9 groups), HTTPS, port mirroring, LLDP, DHCP server, TFTP, FTP, Syslog, MIB, NTP, SNTP, ARP, TCP/UDP
Ping & traceroute: IPv4
Unidirectional link detection: UDLD for incorrect wiring or cable/port faults
Cable diagnostics: TDR cable diagnostics
Port monitoring: Loopback detection
Digital diagnostic monitoring: SFP port DDM
System alarms: Linkage relay, web alarm, CLI alarm, SNMP alarm
MAC address table: MAC address learning and aging
Port control: Speed/duplex mode
Port statistics: MIB counters
Link aggregation: Static aggregation; IEEE 802.3ad port trunking (LACP)
Spanning tree protocol: IEEE 802.1d standard STP; IEEE 802.1w RSTP; IEEE 802.1s MSTP
VLAN: IEEE 802.1Q tagged VLAN; IEEE 802.1ad tagged VLAN (Q-in-Q); Port-based VLAN; MAC-based VLAN; Protocol-based VLAN; IP subnet-based VLAN
Port mirroring: One-to-One, Many-to-One
Flow control: IEEE 802.3x
IGMP snooping: IGMP V1/V2/V3
Ethernet ring protection switching (ERPS): ITU-T G.8032; ITU-T G.8032 V2; ITU-T G.8031 - 1:1 protection; Media redundancy protocol (MRP); IEEE-802.1CB frame replication and elimination for reliability (FRER)
Synchronous Ethernet (SyncE): ITU-T G.803; ITU-T G.826x; ITU-T G.781
Precision Time Protocol (PTP): IEEE 1588; IEEE 1588v2
Priority: IEEE 802.1p priority (CoS)
Traffic policing: Port-based traffic policing
Queue scheduling: 8 queues per port; Egress shaping; Deficit weighted round robin (DWRR) + strict priority (SP)
Remark policy: DSCP remarking
Bandwidth control: ARP speed limit
Access control list: Standard ACL; extended ACL; MAC ACL
Authentication: IEEE 802.1X port-based authentication
Storm control: Broadcast; multicast; unknown unicast
IP binding: IP/MAC Address Binding