ASRock Industrial IMB-1247 Mini-ITX Motherboard
The ASRock Industrial IMB-1247 Mini-ITX motherboard supports Intel Core Ultra Series 2 processors via LGA1851 socket and Q870 chipset, handling up to 65W CPUs and up to 128GB dual-channel DDR5 memory. Its compact 170 × 170 mm size fits industrial setups demanding space efficiency.
Features include a PCIe Gen5 x16 slot with riser card support, four display outputs including USB4/Thunderbolt 4 Type-C, dual M.2 sockets for SSD or wireless modules, and dual Intel Ethernet ports (1GbE, 2.5GbE). Onboard TPM 2.0 and Intel vPro enhance security and management options.
Designed for industrial automation, smart cities, and edge AI, this board operates in temperatures from −20°C to 70°C, providing reliable deployment in harsh environments.
Key Features
- Intel® Core™ Ultra Series 2 and Q870
- Up to 128GB DDR5
- PCIe Gen5 x16 expansion
- Quad-display support
- Onboard TPM 2.0
Specifications
Processor System
- CPU: Intel® Core™ Ultra Series 2 processors (Arrow Lake-S), up to 65W; performance of processors above 65W is limited by the board’s power design
- Chipset: Intel® Q870
- Socket: LGA1851
- BIOS: AMI SPI 256Mbit
Form Factor
- Dimensions: Mini-ITX, 6.7 × 6.7 × 1.5 inches / 170 × 170 × 38 mm (W × D × H)
Memory
- Technology: Dual-channel DDR5-5600/6400; DDR5-6400 requires CSO-DIMM modules, while standard SO-DIMM modules support DDR5-5600
- Capacity: Up to 128GB, 64GB per DIMM
- Socket: 2 × 262-pin SO-DIMM
Graphics
- Controller: Intel® Xe LPG Graphics
- HDMI: HDMI 2.1, up to 7680 × 4320 at 60Hz
- DisplayPort: DisplayPort 2.1/1.4a with DP++ support, up to 4096 × 2160 at 60Hz
- LVDS: Dual-channel 24-bit, up to 1920 × 1200 at 60Hz; connector shared with eDP
- eDP: Up to 1920 × 1080 at 60Hz; connector shared with LVDS
- MultiDisplay: Quad-display support, including one output through USB Type-C
Expansion Slot
- PCIe: 1 × PCIe Gen5 x16 slot, supporting x8/x8 and x8/x4/x4 configurations through an optional riser card
- M.2: 1 × Key E 2230 socket with PCIe Gen4 x1, USB 2.0 and CNVi for an optional wireless module; 1 × Key B 3042/3052 socket with PCIe Gen4 x1, USB 3.2 Gen1, USB 2.0 and SIM support for an optional 4G/5G module
- SIM Socket: 1 × SIM socket connected to M.2 Key B
Audio
- Interface: Realtek ALC897, High Definition Audio, with line-out and microphone-in
Ethernet
- Controller/Speed: LAN1: Intel® I219LM, 10/100/1000 Mbps, with vPro support; LAN2: Intel® I226V, 10/100/1000/2500 Mbps
- Connector: 2 × RJ45
Rear I/O
- HDMI: 2 × HDMI 2.1
- DisplayPort: 1 × DisplayPort 1.4a with DP++ support
- Ethernet: 1 × 2.5GbE LAN and 1 × Gigabit LAN
- USB: 1 × USB4/Thunderbolt™ 4 Type-C with 5V/3A power output and DisplayPort 2.1 display output; 5 × USB 3.2 Gen2; Thunderbolt compatibility is subject to the supplier’s support list
- Audio: 2 × audio jacks, microphone-in and line-out; microphone-in and line-in listed as an optional configuration
- COM: COM1 and COM3 support RS-232/422/485
Internal Connector
- USB: 2 × USB 3.2 Gen1 through one USB 3.2 header; 2 × USB 2.0 through one 2.54 mm-pitch header
- COM: COM4 and COM6 support RS-232
- GPIO: 4 × GPI and 4 × GPO
- LVDS: 1 × shared LVDS/eDP connector, selected through BIOS
- SATA PWR Output: 1 × SATA power output connector
- Speaker Header: 1 × speaker header
Security
- TPM: Onboard TPM 2.0 IC
Storage
- M.2: 1 × Key M 3042/2280 socket with PCIe Gen4 x4 and SATA3 for an SSD; 1 × Key M 2242 socket with PCIe Gen4 x4 and SATA3 for an SSD; optional M2X4-SATA-4P module recommended for four additional SATA ports, requiring a special BIOS
- SATA: 3 × SATA3, 6Gb/s; SATA3_7 shares its interface with M.2 Key M1
- RAID: Intel® VMD RAID 0/1/5/10 support, subject to drive count and configuration; drives must use the same interface type; listed PCIe combinations are M.2 Key B plus M.2 Key M1/2, or two M.2 Key M drives; SATA RAID uses the SATA ports
Watchdog Timer
- Output: Super I/O to RESETCON#
- Interval: 256 segments, 0–255 seconds
Power Requirements
- Input PWR: ATX power through 24-pin and 4-pin connectors, with a co-designed 12V DC-in power option
- Power On: AT/ATX support; AT mode powers on automatically when input power is available, while ATX mode uses the power button
Environment
- Operating Temperature: −20°C to 70°C
- Storage Temperature: −40°C to 85°C
- Operating Humidity: 5–90%, non-condensing
- Storage Humidity: 5–90%, non-condensing
Accessories
- Gift Package: 1 × I/O shield (13G02P080000AK), 4 × M3 × 2.5 screws (13G02P072010AK), 1 × SATA power cable (14G000100410AK), 1 × COM cable (14G000000310AK), 2 × SATA data cables (14G00010107DAK) and 1 × 3.35 mm M3 nut (13G02P059010AK)
- Bulk Package: 1 × I/O shield (13G02P080000AK), 4 × M3 × 2.5 screws (13G02P072010AK) and 1 × 3.35 mm M3 nut (13G02P059010AK)


























