ASRock Industrial iEP-7030E Series Industrial IoT Controller
The ASRock Industrial iEP-7030E Series is a fanless industrial IoT controller powered by the Intel Core Ultra 7 155H processor, with Intel Arc graphics and an integrated NPU for AI acceleration. It supports up to 96GB of DDR5 memory. Compared with controllers offering a single power input, its redundant DC inputs allow connection to two power sources.
Potential applications include industrial automation, machine vision and remote monitoring, where Ethernet, serial interfaces and digital I/O connect equipment and sensors. Six variants offer different combinations of additional LAN ports, PoE, wireless expansion and isolated digital I/O. Wi-Fi and cellular modules are optional, allowing connectivity to be configured for the installation.
Order Information
All models use the Intel Core Ultra 7 155H and are supplied without memory, storage or a power adapter. Wi-Fi and cellular support below require separately purchased modules.
- iEP-7030E-020 — Part number: 90PXGCU0-00000000; Basic SKU; 3 LAN ports; Wi-Fi support; no cellular or PoE support; 4DI/4DO
- iEP-7030E-021 — Part number: 90PXGCU0-10000000; PoE SKU; 5 LAN ports, including 2 PoE ports; Wi-Fi support; no cellular support; 4DI/4DO; 19–36V DC input
- iEP-7030E-022 — Part number: 90PXGCU0-20000000; 5LAN-WIFI SKU; 5 LAN ports; Wi-Fi support; no cellular or PoE support; 4DI/4DO
- iEP-7030E-023 — Part number: 90PXGCU0-30000000; 5LAN-5G SKU; 5 LAN ports; 4G LTE/5G support; no Wi-Fi or PoE support; 4DI/4DO
- iEP-7030E-024 — Part number: 90PXGCU0-40000000; 5G-WIFI SKU; 3 LAN ports; Wi-Fi and 4G LTE/5G support; no PoE support; 4DI/4DO
- iEP-7030E-025 — Part number: 90PXGCU0-50000000; 8DIO SKU; 3 LAN ports; Wi-Fi support; no cellular or PoE support; 8DI/8DO with sink/source isolation
Key Features
- Intel Core Ultra 7 with NPU
- Fanless design
- Redundant DC power inputs
- Three 2.5 Gigabit Ethernet ports
- PoE and isolated I/O variants
Specifications
Processor System
- CPU: Intel Core Ultra 7 155H, Meteor Lake-H, 16 cores, 1.40GHz, 28W
- BIOS: AMI SPI 256Mbit
- Chipset: MCP
Memory
- Technology: Dual-channel DDR5-5600 with Intel In-Band ECC support
- Capacity: Up to 96GB
- Socket: 2 x 262-pin SO-DIMM
Graphics
- Controller: Intel Arc Graphics
- HDMI: HDMI 2.0b, up to 4096 × 2160 at 60Hz
- VGA: Up to 1920 × 1200 at 60Hz
Expansion Slot
- M.2: 1 x Key B 3042/3052 socket with PCIe Gen3 x1/USB 3.2 for an optional 4G LTE/5G module; 1 x Key E 2230/2260 socket with CNVi/PCIe Gen3 x1/USB 2.0 for an optional Wi-Fi/Bluetooth module; module support depends on SKU
- RF & Antenna: 7 reserved SMA connector holes for Basic and 5G-WIFI variants; 5 for PoE, 5LAN and 8DIO variants
Audio
- Interface: Realtek ALC897, High Definition Audio
Ethernet
- Controller/Speed: LAN1–LAN3: Intel I226-IT, 10/100/1000/2500Mbps; LAN4–LAN5 on 5LAN variants: Intel I210-AT, 10/100/1000Mbps; PoE1–PoE2 on the PoE variant: Intel I210-AT with IEEE 802.3af, maximum 15.4W per port
- Connector: RJ-45
Front I/O
- Audio: 1 x microphone input, 1 x line output
- COM: 2 x RS-232/422/485
- Ethernet: 3 x 2.5 Gigabit LAN
- HDMI: 1 x HDMI 2.0b
- USB: 3 x USB 3.2 Gen2x1, 1 x USB 2.0
- LED: 2 x diagnostic LEDs, 2 x DC input LEDs
- DC-IN: 2 x 3-pin Phoenix-type connectors
- Power Button: 1, with LED
Rear I/O
- SIM Card: 1 x Nano SIM card slot
- Micro SD Card: 1 x microSD slot supporting SD specification v3.0 UHS-I, SDR25/SDR50
Manageability / Security
- Manageability: Intel In-Band Manageability and watchdog timer
- Security: TPM 2.0
Top I/O
- COM: 1 x RS-232/422/485
- Ethernet: 2 x Gigabit LAN for 5LAN variants only
- PoE: 2 x Gigabit LAN with IEEE 802.3af support for the PoE variant only
- LED: 2 x PoE LEDs for the PoE variant only
- Digital I/O: 4DIs/4DOs for all SKU (15-pin D-sub connector); 8DIs/8DOs with sink/source isolation 36V for 8DIO SKU only (2x10-pin connector)
Storage
- M.2: 1 x Key M 2280 socket with PCIe Gen4 x4 for an SSD
Watchdog Timer
- Output: Reset signal from Super I/O to RESETCON#
- Interval: 256 settings, 0–255 seconds
Power Requirements
- DC Input: Redundant 9–36V DC input for Basic, 5LAN, 5G-WIFI and 8DIO variants; redundant 19–36V DC input for the PoE variant; overvoltage, undervoltage and overcurrent protection, plus 80V surge protection
- AC to DC Adaptor: Optional 120W adapter for Basic, 5LAN, 5G-WIFI and 8DIO variants, with 100–240V AC, 1.8A, 50–60Hz input and 19V DC, 6.32A output; optional 330W adapter for the PoE variant, with 100–240V AC, 4.2A, 50–60Hz input and 24V DC, 13.75A output
- Power Interface: 3-pin terminal block with V+, V− and frame ground
Environment
- Operating Temperature: −25°C to 50°C with 0.5–0.8m/s airflow
- Storage Temperature: −40°C to 85°C
- Humidity: Approximately 95% at 40°C, non-condensing
Mechanical
- Construction: Aluminum
- Dimensions: Basic and 8DIO variants: 55 × 134 × 170mm; PoE, 5LAN and 5G-WIFI variants: 68 × 134 × 170mm (W × D × H)
- Mounting: Optional DIN-rail, wall and VESA mounting for Basic and 8DIO variants; optional wall and DIN-rail mounting for PoE, 5LAN and 5G-WIFI variants
- Net Weight: To be determined
Standards and Certifications
- Safety: EN 62368-1, LVD
- EMC: EN 61000-6-2/-6-4, CE; FCC Part 15B Class A
- EMS: IEC 61000-4-2, ESD protection Level 4, ±8kV contact and ±15kV air
- Shock: IEC 60068-2-27, operating 100G, half-sine pulse lasting 11ms, with SSD
- Vibration: IEC 60068-2-64, operating 5Grms, 5–500Hz, three axes, with SSD
Others
- OS Support: Windows 11 and Linux
- Packing List: 3 x M2 × 2 screws, 2 x 3-pin Phoenix connectors, 1 x system quick installation guide
- Optional Items: 19V/120W power adapter for Basic, 5LAN, 5G-WIFI and 8DIO variants; 24V/330W power adapter for the PoE variant; Wi-Fi, 4G LTE and 5G kits including module, antennas and SMA cables; DIN-rail, wall and VESA mounting kits according to variant


























